Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
BR250X4 Car Amplifier Features:
- Heavy Duty Aluminum Heat Sink
- High capacity power transformer
- Bridgeable at 4ohm
- 2 ohm stereo stable
- Double PCB circuit board design
- With High-Level Input
- Die-cast silver terminals
- Power and Protection LED indicators
- Thermal / Short Circuit /D.C protection
- High-current MOSFET devices
- 24dB/octave BOOST
- With Volume remote control
- Die-cast silver terminals
- 1 Year Warranty
- Dimension (L x W x H): 13-13/16" x 9-5/16" x 2-1/8" (35.10cm x 23.70cm x 5.41cm)
BR250X4 Amplifier Specifications:
- Amplifier Class: AB
- Number of Channels: 4 Channels
- Peak Power: 2000 Watts
- Power at 4 Ohms: 125 Watts RMS x 4 Ch @ 14.4V
- Power at 2 Ohms: 250 Watts RMS x 4 Ch @ 14.4V
- Bridged Power: 500 Watts RMS x 2 Ch @ 4 Ohms (14.4V)
- Signal-to-Noise Ratio: 93dB
- Build-in Crossover: Low-pass (LP), High-pass (HP), Full (AP)
- High Pass Filter: 15Hz - 500Hz (w/ x10 Multiply)
- Low Pass Filter: 50Hz - 500Hz (w/ x10 Multiply)
- Bass Boost: 0-12dB
- Fuse Rating: 40A x 2 (4 Included: 2 Pre-Installed, 2 Spare)
- Overall Length: 13.82" (351mm)
- Overall Width: 9.33" (237mm)
- Overall Height: 2.13" (54.1mm)
- Gauge Speakers: 12 Ga, 14 Ga, 16 Ga, 8 Ga
- Power Gauge: Up-to 8 Ga
- Accessories: Mounting Screws, High Input Wires
BR250X4 Power Supply Specs:
- 35 Nanosecond Switching Diode
- MMT Regulated Power Supplies
- High Capacity Power Transformer
- Multiple By pass Capacitance incoming 12 V Supply
- Time Delay Turn on with Opto-coupled muting circuits
- Power Supplies use pulse-width modulation
- Thermal and reverse polarity protection
- Output stages utilize high current mosefet devices
- High Speed audio grade component's all level stages
- Active constant current bias tracking circuit
- Gold plated RCA inputs and connectors
- Wide range of sensitivity accept signals from any unit
- True Line output
- Short Circuit protection
- Auto Bridge Feature
Brand | Bass Rockers |
---|---|
MPN | BR250X4 |
Model | BR250X4 |
UPC | 616450369934 |
Condition | New |
Featured | No |
Warranty | Limited 1 Year (by Manufacturer) |
Amplifier Class | AB |
Number of Channels | 4 Channel |
Peak Power | 2000 Watts |
Power at 4 Ohms | 125 Watts RMS x 4 Ch @ 14.4V |
Power at 2 Ohms | 250 Watts RMS x 4 Ch @ 14.4V |
Bridged Power | 500 Watts RMS x 2 Ch @ 4 Ohms (14.4V) |
Signal-to-Noise Ratio | 93dB |
Crossover | Low-pass (LP), High-pass (HP), Full (AP) |
High-Pass Filter | 15Hz - 500Hz (w/ x10 Multiply) |
Low-Pass Filter | 50Hz - 500Hz (w/ x10 Multiply) |
Bass Boost | 0-12dB |
Fuse Rating | 40A x 2 (4 Included: 2 Pre-Installed, 2 Spare) |
Length | 13.82" (351mm) |
Width | 9.33" (237mm) |
Height | 2.13" (54.1mm) |
Gauge | 12 AWG, 14 AWG, 16 AWG, 8 AWG |
Input Gauge Size | 8 Ga |
Accessories (select all applicable) | Mounting Screws |
Write Your Own Review