- SEQUENCER: This feature allows the sequential triggering of other products through its remote trigger connection (REM). Connect using a cable of at least 0.75mm². Each connection can be configured, enabled, or disabled by the SMC app or control.
- REM IN: Use this connection for automatic activation of the processor when turning on the radio/player. Connect the remote output of the radio/player using a cable of at least 0.75mm².
- NEGATIVE POWER SUPPLY CONNECTOR (GND): Connect to the negative terminal of the battery using a cable of at least 2.5mm². Presentation of Processor 67109811 123455
- POSITIVE POWER SUPPLY CONNECTOR (+BAT): Connect to the positive terminal of the battery using a cable of at least 2.5mm². It is recommended to use a 1A fuse for external protection.
- SMC INPUT: Dedicated connection for the Stetsom Module Central (SMC) control module. Through it, it is possible to access the processor's features without the need for the app.
- AUDIO INPUT WITH HIGH INPUT CONNECTION (INPUT): High input audio connection with independent operation (A and B). Check the installation diagram in this manual for the radio/player harness.
- AUDIO INPUT WITH RCA CONNECTION (INPUT): Double RCA connectors with independent operation (A and B). Connect to the audio output of the radio/player using RCA cables. Preferably use quality shielded cables to avoid noise.
- MAX LEDS (INPUT): These LEDs act individually to indicate signal saturation in the input channels.
- COMMAND BUTTON: Used to restore the processor's settings and updates. See "processor reset" topic.
- AUDIO OUTPUTS (OUTPUT): Individual RCA output connections provide the processed audio with the parameters performed in the processor.
- LIMITER LED (OUTPUT): These LEDs act when the "LIMITER" function is in use. Each channel has a dedicated LED for individual visualization. The LEDs also act as signal saturation indicators in the output.
- Number of Channels Input: 2 x RCA (A+B) or 2 x HIGH INPUT (A+B) Output: 4 (1, 2, 3, 4)
- Graphic Equalizer 15 Bands (gain ±12dB)
- Graphic Equalizer Presets 12
- Parametric Equalizer 5 Bands (1 Input + 4 Output) (gain ±12dB, Factor Q 0.4 a 10.0)
- Crossover with Variable Freq. Butterworth: 12/18/24/36 dB/8ª Linkwitz-Riley: 12/18/24/36 dB/8ª
- Crossover Presets 11
- Routing between input/output A, B ou A+B
- Alignment 0ms ~ 8ms (275cm)
- Phase Inversion 0° ~ 180°
- Limiter Threshold: -24dB ~ 0dB Attack: 0.1ms ~ 100.0ms e Release: 1ms ~ 1600ms (manual or auto.)
- Master Level 0 ~ 100%
- Output Gain -45dB ~ +15dB per output
- Frequency Generator 10Hz ~ 22kHz and Level -60 ~ 0dB
- Frequency Scan Starting and ending frequency: 10Hz ~ 22kHz Level: -60dB ~ 0dB
- Pink Noise Generator Gain: -60dB ~ 0dB
- Battery Voltage Monitor Current, minimum and maximum voltage
- Password 6-digit password
- Input Impedance RCA: 28 kΩ / FIO: 1 kΩ
- Output Impedance 47 Ω
- Signal to Noise Ratio > 90dB
- Total Harmonic Distortion < 0,01% T.H.D.
- Channel Separation > 80dB
- Frequency Response 10Hz ~ 22kHz @ 0dB
- Max. Input Voltage RCA: 5,6 Vpp (+8,2 dBu) HIGH INPUT: 15 Vpp (+18 dBu)
- Max. Output Voltage 5,6 Vpp (+8,2 dBu)
- Power Supply 10V ~ 15V DC
- Max. Output current SEQUENCER 180 mA per output
- Rated Current Consumption 170mA @ 12.6V DC
- Maximum Current Consumption 710mA @ 12.6V DC
- Protection Short Circuit (PTC fuse)
- Bluetooth Version Low Energy (LE)
- Range 15 meters*
- Compatibility Android 5.0 or higher iOS 12 or higher
- Dimensions (H x W x L) 1.3” x 3,8” x 7,4”
- Weight 0.40 Lb
- Compatible SMC Remote Control Sold Separately
Stetsom STX2436BT DSP Bluetooth Complete Digital Signal Processor Band Graphic EQ Crossover
In stock
In stock
SKU
STX2436BT
$109.99
Details
More Information
| Brand | Stetsom |
|---|---|
| MPN | STX2436BT |
| Model | STX2436BT |
| UPC | NA |
| Condition | New |
| Featured | Yes |
| Warranty | 1 Year (by Manufacturer) |
| Signal Processor Type | Crossover, Equalizer |
| Type of Equalizer | Digital |
Reviews
Only registered users can write reviews. Please Sign in or create an account
{{title}}
{{detail}}